This is a Demo version ! You only see 60% of the Control Panels ! Register Using the 'Register' application or register online at
http://order.kagi.com/cgi-bin/register1.cgi?PQ
PageMark
Flashes a bar to mark the end of the previous page when you use a scrollbar control or the Page Down key to scroll down a page and reach the end of a document. When you reach the end of a document, often the page has scrolled up just a few lines rather than a whole page... and you have to scan back over a whole page you've already read to find the new lines at the end. With PageMark, you won't waste time figuring out where you are, since the flashing indicator shows you exactly where the previous page ended.
Latest Version: 2.0
Email: bonze@kagi.com
PaperPort
Part of PaperPort, this control panel allows you to turn a scanner connection on/off as well as other scanning setting.
Latest Version: 3.5.1
PaperPower‚Ñ¢ Control
Allows you to control PaperPower‚Ñ¢. Use this control panel to add or remove overlays, change PaperPower preferences, position the start key, or change the overlay storage area (the memory reserved for overlays).
Latest Version: 1.0.1
Password Security
Allows you to protect your PowerBook from strangers by giving it a password. Anyone accessing your hard drive is require to key in the correct password. Be careful: if you forget the password, even Apple authorized service may not be able to give you access to your own data!
Latest Version: 1.0.8 (From Mac OS 8.5)
PC Exchange
Allows your Mac OS-based computer to read and create ProDOS and MS-DOS 3.5-inch disks. You can specify the Mac OS application program used to open a DOS document. You can also use SyQuest and Bernoulli disks on your desktop. Version 2.2 supports VFAT and FAT32 volume formats as used by Windows 95. Support for Long File Names (LFN), DOS (FAT) file system and FAT32 support for 4 GB Volumes has also been added. PC Exchange now has better support for removable media, such as Jaz, Zip, and PMO. Works on all Mac OS-based computers that use System 7.5.
Latest Version: 2.2
PC Setup
Used with the DOS Compatibility Card to choose virtual drives, select ports, etc. Unless you have a DOS Compatibility Card installed on Power Mac, you don't need this.
Latest Version: 1.0.7
PDFWriter Shortcut
Allows a temporary switch to PDFWriter to print documents into PDF format.
Latest Version: 2.0
Performa
Allows you to set various options, including desktop hiding, Launcher visibility at startup, folder protection to prevent folders and files from being deleted, insertion-point blinking rate, menu selection blinking, and the default folder that appears in the Save dialog box. Works on Performa models running System 7.1P.
Latest Version: 7.1Px
Pointer Mode
Allows you to set the mouse pointer to standard mode. Useful when a screen-capture application fails to include the pointer.
Latest Version: 1.0
PopChar or PopChar Lite
Invaluable when using Dingbats or foreign fonts such as Greek and Hebrew. Select your "hot spot" (usually upper left corner), deselect "look for available font size" and "apply patch for Adobe Type Reunion," and pick your preferred font size (18 or 24 is nice). When you go to the hot spot, Pop Char will display every character in that font. Point to the one you want, let go of the mouse button, and it will be inserted at the cursor.
You know the popup menu you get when you command-click a Finder™ window’s title bar? This control panel adds similar functionality to most applications.
Latest Version: 1.1
Email: turly@apple.com
PopupFolder
Allows you to create submenus up to 16 levels deep in the Apple Menu.
Latest Version: n/a
Portable Control Panel
Allows you control screen brightness if your Macintosh Portable (not PowerBook) display is equipped with a backlight . For System 6.0.7 and System 6.0.8 users only.
Latest Version: 1.3
PortConnector
Enables all communication applications to employ Communication Toolbox (CTB) Connection Tools, and TCP/IP streams instead of modems or direct serial links. Old applications can be used for communicating through X.25, TCP/IP, ISDN and any other network supported with a Connection Tool. As a result, you can connect to your office network using AppleTalk Remote Access through ISDN or TCP/IP, you can use old terminal emulators with TCP/IP, ADSP, X.25, etc. PortConnector can also emulate a serial port using some other serial port, thus enabling access to all CTB-registered serial ports (like PCMCIA modems) for applications supporting only the built-in Modem and Printer ports.
Latest Version: 2.2
URL: http://www.stalker.com/PortConnector/
PortShare Pro
Provides both server and client functionality. It employs the industry standard PortShare protocol. Allows you to share devices (modems, printers, etc.) attached to serial communication ports on any computer on your network. Works with PortShareTask.
Latest Version: 2.6
URL: http://www.stalker.com/PortShare/
Power Macintosh Card
Allows you to select which processor to use on 68040-based Mac OS computers that have an expansion card with a PowerPC processor. Works on all Mac OS-based computers with a Power Macintosh Upgrade card.
Latest Version: n/a
Power Windows
Power Windows is a small control panel that lets you drag the entire contents of windows instead of just a dotted outline. The control panel lets you choose between Solid Dragging and Translucent Dragging.
Latest Version: 2.0.5
Email: greg@math.harvard.edu
URL: http://www.kaleidoscope.net/greg/
PowerBook
Allows you to set PowerBook-specific items, including hard disk sleep, system sleep, and screen dimming. You can also set processor cycling and (on certain computers) reduced processor speed. Controls backlight intensity and built-in video. Works on all Macintosh PowerBooks.
Latest Version: 7.5.4
PowerBook Display
Allows you to duplicate the images on your PowerBook display on an external monitor. Useful for controlling a presentation from your PowerBook while displaying the presentation on a large room monitor. Works on the Macintosh PowerBook 160, 165c, 180, 180c, 200, and 500 models.
Latest Version: 7.5.2 (From Mac OS 8.5)
PowerBook SCSI Disk Mode
Lets a PowerBook user select the SCSI ID to which the Power Book will respond when used in SCSI Disk Mode.
Latest Version: 1.0 (From Mac OS 8.5)
PowerBook Setup
Allows you to set a unique SCSI ID number for your PowerBook when you're using SCSI disk mode. You can also specify a Normal or Compatible modem setting for your PowerBook. Use Normal for communication applications that are compatible with the Macintosh Communications Toolbox. Use Compatible for communication applications that are not compatible with the Communications Toolbox. Works on all Macintosh PowerBook 200 and 500 models.
Latest Version: 7.3.2
PowerDomain Control
Allows you to configure your PowerDomain SCSI accelerator board.
Latest Version: 4.0
URL: http://www.adaptec.com/
PowerFPU
Enables 68K applications that require an FPU (Math Processor) to operate on a Power Macintosh.
Latest Version: 1.0
Email: johnneil@netcom.com
PowerMenu Controls
Adds commands to the Finder's Contextual Menu under MacOS 8, and provides its own Contextual Menu for System 7 users, available from any application, that lets you quickly open your commonly used files or launch applications. The PowerMenu Controls control panel lets you change a great many aspects of PowerMenu's behavior and appearance. Work together with 'PowerMenu Extension'.
